{"draft":"draft-ietf-ccamp-gmpls-egress-control-03","doc_id":"RFC4003","title":"GMPLS Signaling Procedure for Egress Control ","authors":["L. Berger"],"format":["ASCII","HTML"],"page_count":"5","pub_status":"PROPOSED STANDARD","status":"PROPOSED STANDARD","source":"Common Control and Measurement Plane","abstract":" This document clarifies the procedures for the control of the label used on an output\/downstream interface of the egress node of a Label Switched Path (LSP).  This control is also known as \"Egress Control\".  Support for Egress Control is implicit in Generalized Multi-Protocol Label Switching (GMPLS) Signaling.  This document clarifies the specification of GMPLS Signaling and does not modify GMPLS signaling mechanisms and procedures.  [STANDARDS-TRACK]","pub_date":"January 2005","keywords":["lsp","label switch path","gmpls signaling"],"obsoletes":[],"obsoleted_by":[],"updates":["RFC3473"],"updated_by":[],"see_also":[],"doi":"10.17487\/RFC4003","errata_url":null}